The information contained in this article, though not private or confidential, is not intended for Hudson client use.  This information is directed to and intended for internal Hudson company use only.

The ini files used by Agent, Dispatcher, Bridges, HGUtils,  etc. can be set to enable, by default, certain logging parameters.  The ini command files look similar to this:


BridgeLogTraceStates=
HgutilsLogTraceState=

HWeb Agent / Dispatcher / Admin Logging:

Log Trace Settings are set via the application configuration dialog and are not generally set within the ini.  To access the application config settings:   Tools > Configuration > Log Settings

The Items that can be enabled with a check mark are:
Error
Info
Debug
Program
Params
Log

The format of the  ini setting is therefore:

LogStates=Error|Info|Debug|Program|Params|Log|

Enabling Error and Program logging would therefore be written:
LogStates=1|0|0|1|0|0|

HWeb Bridge Logging

The sequence of parameters traced in a Bridge Log:
ERROR|INFO|DEBUG|PROGRAM|DBFIELD|TIMER|SOCKMSG|WARNING|DATA|UPLOAD|FTP|REQUEST|FLIGHTINFO|SOCKETS|TXDATA|RXDATA|STATISTICS|GDF|GDFDUMP|JCLIENT

A sample BridgeLogTraceStates might appear:
BridgeLogTraceStates=1|1|0|0|0|0|0|0|1|0|0|0|1|0|0|1|0|0|0|0|1|